P6502 Tractor Lower Link Pin Category 2
P6502 Tractor Lower Link Pin Category 2
Couldn't load pickup availability
What This Is
This is a single Category 2 lower link pin for a tractor three-point hitch. A lower link pin connects a lower lift arm to an implement or to the tractor, and this pin uses a threaded end with a hex nut to hold it securely in place.
Fitment
This is a standard Category 2 lower link pin. Category 2 is the three-point hitch size used on many mid-size and larger utility and agricultural tractors. Because lower link pins are sized by shaft diameter and length, and tractors and implements vary, measure your existing pin and the lift-arm bore before ordering to confirm this pin fits your hitch and implement.
Specifications
Hitch category: Category 2. Thread: 7/8 inch, with a hex nut. Shaft diameter: Category 2 lower link pins use a nominal 1-1/8 inch (28.6 mm) shaft. The live listing does not publish an exact measured shaft diameter, so verify against your own pin. Quantity: one pin. Material: steel with a protective yellow finish.
What Is Included
You receive one Category 2 lower link pin with its hex nut. No separate clip or cotter pin is required for the threaded end, because the hex nut retains the pin.
Cross-Reference and Ordering
Replaces aftermarket lower link pin number P6502. The internal reference 30136E91 is an International Harvester style number, and it was not independently confirmed as the exact OEM this pin replaces, so order by measuring your existing Category 2 pin and matching the 7/8 inch thread and hex nut style. Use as a replacement for a worn, bent, or missing Category 2 lower link pin.
